Type:2-stroke engine, Carburetor, Ignition coil & CDI, Throttle handlebar set, Throttle cable, Clutch cable, Kill switch, Clutch lever, Chain, Chain cover, 44T Sprocket W/ 9 Hole Clamp Pads, Chain Tensioner, Fuel tank, Fuel filter, Gasoline fuel line, Petcock, Muffler.
Bore & Stroke: 47mm X 40mm=80 CC
Rated Power: 2.5Kw/5000r/min (3 horsepower/5000r/min)
Max Power: 3.5Kw/6000r/min (5-6 horsepower/6000r/rnin)
Ignition Mode: CID
Compression Ratio: 6/0.1
Driving Ratio: 18/0.1
Fuel type: No.90
Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30)
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km
Type of Sparking Plug: Z4C 14MM
Volume of oil Consumption: 2.5L/100km
Type of Clutch: Friction Plate / Dry
Cooling mode: Natural air cooling
Speed Limitation: 38km/hour
1.Black 80cc 2-stroke engine
2. Sprocket clamp assembly with hardware
3. Converter exhaust muffler with heat shield (silver)
4. Push button clutch
5. Heavy duty chain
6. Bearing chain tensioner / idler
8. CD ignition coil
9. Kill switch (on throttle)
10. Chain guard
11. Spark plug
12. 2L gas tank with mounting brackets
13. Muffler assembly
14. Exhaust pipe clamp
15. Plug removal tool
16. Standard universal mounting bracket
General Information: Please, obey all traffic regulations.
We make certain that all of our manufactures abide by strict quality control assurance measures and use the highest quality material so that we can make certain that all of our customers get only the best. Made for experienced riders and builders, our 80cc engine kit is ready soar- are you?
Power: 5-6 HP (horse power) stock -Top Speed: 25-35 MPH (miles per hour) stock – Fuel Economy: 100-150 miles per gallon
Installation is a breeze! The rider only needs some basic hardware skills, tools, and around 2-3 hours for installation and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).
Fits Most 26″ Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
NOTE: Throttle grips may vary in appearance between shipments. However, this does not effect the performance of the engine.Upon purchase, the buyer agrees to use products for racing (closed-course competition) only and NOT for on/off public roads.